Interior doors are designed for installation in interior dry, ventilated rooms with a humidity of 60% at room temperature, where no changes in these important factors.
During storage and transportation shall be taken for protection of their deformation, mechanical damage, soiling, exposure to atmospheric precipitation and direct sunlight. Interior doors are allowed to be transported by all kinds of transport in covered vehicles and containers. The loading zone of interior doors in a vehicle or container should not have protruding elements and should be lined. On interior doors it is not allowed to occur, and did not put them when performing loading and unloading operations. Shipping a set of interior doors should be secured with cloth tapes. During the loading and transportation of door panels is necessary to observe the laying pattern canvases in the foot. The stop should be no more than 40 paintings. Doors with glass must be positioned in the center of the foot. Laying is carried out according to the size of the canvases. The bottom must be interior doors larger. When laying the canvases must be placed on the bottom substrate of MDF.
In order to avoid deformation of the door must be stored in a package, excluding the possibility of mechanical damage, in an enclosed dry and ventilated room with a humidity of 60% at room temperature, eliminating extremes of these factors. Must be stored in a horizontal position on the tray with stack height no more than 1200 mm. shall Not be stored interior doors in a vertical or sloping position, away from sources of heat or cold, in areas where renovations or construction work.